Tillbaka till bloggen
Gör-det-själv-guider 2026-11-16 Skywalker Trampolines - The Best Kids Trampoline 0 visningar

How to Replace a 14' Square Trampoline Spring Pad

How to Replace a 14' Square Trampoline Spring Pad

A practical walkthrough for swapping the blue 14' square spring pad, from checking the old pad's fit to securing the new one and knowing what the catalog does and does not confirm.

Start with the pad you have, not the one you want

A spring pad replacement goes smoothly when you confirm two things before ordering: the pad shape and the pad size. The 14' Square Spring Pad - Blue is made for a square trampoline frame, so it will not fit a round or rectangular frame even if the spring count looks similar. Measure your existing pad across its longest straight edge and compare that to the 14' square size before you buy.

The second check is the old pad itself. Look at how it attaches to the frame and whether the springs sit under or through the pad. The supplied catalog information for this pad does not include strap or attachment details, so use your existing pad as the reference for how the new one should sit. If your current pad uses straps, note where they connect and how tight they are before you remove anything.

What the blue 14' square pad actually gives you

  • Square shape: The pad is listed as square, which matches a square frame. Confirm your frame is square before ordering.
  • 1/2" thickness: The catalog lists the pad as 1/2" thick. That is the only thickness figure supplied, so do not assume it matches a thicker or thinner pad you have seen elsewhere.
  • UV-resistant PVC: The pad is made of thick UV-resistant PVC, which is the material you are replacing when the old pad cracks or fades.
  • Genuine Skywalker component: The pad is a genuine Skywalker Trampolines component and is listed as meeting or exceeding all ASTM safety standards.
  • One-year limited warranty: The pad carries a one-year limited warranty. Keep your order details in case you need to make a claim.
  • Color may vary: The pad is blue, but the catalog notes the color may vary from the photo. Do not count on an exact shade match to your old pad.

The product record behind this replacement

  • 14' Square Spring Pad - Blue: 14' Square Spring Pad - Blue, made of thick UV-resistant PVC, 1/2" thick, square shape These are the details to match against your frame and old pad before you order.
    14' Square Spring Pad - Blue
    14' Square Spring Pad - Blue
  • 14' Square Spring Pad - Blue: Meets or exceeds all ASTM safety standards and carries a one-year limited warranty Confirms the pad is a genuine Skywalker component rather than a generic cover.

Spring pad replacement steps that follow the evidence

The supplied catalog information does not include a manufacturer installation procedure, so the steps below describe the general order of a pad swap and leave attachment specifics to your existing pad. Stop and check your trampoline manual if anything about the frame or springs is unclear.

  1. Clear the trampoline and work area: Remove the enclosure net or any accessories that block access to the springs, and make sure no one is jumping while you work.
  2. Photograph the old pad in place: Take a few photos of how the old pad sits over the springs and frame. This is your reference for putting the new pad back in the same position.
  3. Release the old pad's attachments: Undo the straps or fasteners holding the old pad, working around the frame. Keep the hardware together so you can see what the new pad needs to match.
  4. Lift the old pad away: Remove the pad and check the springs and frame underneath for anything that needs attention before the new pad goes on.
  5. Lay the new pad in position: Set the 14' square pad over the springs, aligning the corners with the frame corners. A square pad only sits correctly one way, so check the corners before fastening.
  6. Fasten the pad the way the old one was fastened: Use the same attachment points and method as the pad you removed. The catalog does not specify a strap pattern, so do not invent one.
  7. Walk the perimeter and check the fit: Confirm the pad covers the springs evenly and sits flat. Recheck the corners and any straps before allowing use.

The fit check that saves a return

Before you order, measure the old pad and the frame opening. The pad is listed as 14' square, so the frame should be a 14' square frame. If your measurement lands between sizes, or your frame is round, this pad is not the right part and no amount of strap adjustment will fix it.

Check the spring count and spacing too. The catalog does not list a spring count for this pad, so use your existing pad as the guide. If the old pad covered every spring with a little overhang, the new pad should do the same. If the old pad was already too small or too large, that is a sign the size was wrong before, not that the new pad is defective.

What the supplied information does not cover

The catalog does not include a strap layout, a spring hook procedure, or a torque or tension specification. It also does not state a maximum user weight, a weather rating, or a recommended replacement interval. Treat those as open questions rather than assuming a number.

If your trampoline manual specifies a particular order for attaching springs or straps, follow the manual. The steps above are a general sequence, not a manufacturer instruction, and they should not override anything in your own documentation.

Keeping the new pad in better shape

The pad's UV-resistant PVC is the reason it can live outdoors, but that does not make it indestructible. Check the pad after storms and at the start of each season for cracks, fading, or straps that have come loose. A pad that has pulled away from the frame exposes springs, which is the main reason to replace it rather than patch it.

When you store the trampoline or leave it unused for a long period, the catalog does not give storage instructions, so use your own judgment and keep the pad from sitting under standing water. If the pad fails within the one-year limited warranty period, contact the seller with your order information rather than buying a second pad.

Relaterade artiklar

Customer Service
Hem
Produkter
Varukorg
Profil