How to Set Up the 17' Oval Trampoline and Triple Toss Game

How to Set Up the 17' Oval Trampoline and Triple Toss Game

By Skywalker Trampolines - The Best Kids Trampoline | Published: 2026-11-03

Category: Veiledninger

A step-by-step guide to assembling the Skywalker 17' Oval trampoline with enclosure net and Triple Toss game, including checkpoints to avoid common setup mistakes.

Quick answer

Set up the Skywalker 17' Oval trampoline by assembling the frame and legs first, then attaching the mat and springs, and finally installing the enclosure net. Attach the Triple Toss game after the net is secure, following the included instructions for exact placement.

Why the order matters for an oval trampoline with enclosure net

The 17' oval frame is longer than a round trampoline, so it needs more space and careful alignment. Attaching the mat and springs before the frame is fully stable can twist the frame or stretch the mat unevenly. Always complete the frame and leg assembly on level ground before adding the jumping surface.

The enclosure net should go on only after the mat is fully secured. If you install the net first, it gets in the way when you tension the springs and can be damaged by tools or metal edges.

Where the Triple Toss game fits in

The Triple Toss game is a separate accessory that attaches to the trampoline, but the exact mounting points depend on the hardware included. Do not guess or modify the net to make it fit. Install the game only after the enclosure net is fully secured and checked, and follow the game's own instructions for placement so it does not interfere with the net or jumping area.

Step-by-step setup for the 17' Oval trampoline and Triple Toss game

  1. Prepare a level site: Clear a flat area with at least 2 feet of clearance around the trampoline and no overhead branches or wires. Check the ground with a level; if it slopes, level it with soil or use a mat. Common mistake: setting up on uneven ground causes the frame to rock and stresses joints. A level site prevents frame warping and makes the rest of the assembly easier.
  2. Assemble the frame and legs: Lay out all frame pieces and connect the top rails and legs according to the manual. Tighten all bolts by hand first, then fully tighten once the frame is square. Common mistake: over-tightening one side before the frame is aligned can pull the oval out of shape. Leave bolts slightly loose until the entire frame is assembled and square.
  3. Attach the jumping mat and springs: Lay the mat inside the frame and attach springs one by one, alternating sides to keep tension even. Use a spring pull tool to protect your fingers. Common mistake: attaching all springs on one side first can bend the frame or tear the mat. Alternate spring placement like tightening lug nuts on a wheel.
  4. Install the enclosure net: Follow the manual to attach the net to the frame and secure the bottom edge. Make sure the net is taut but not stretched so tight that it distorts the frame. Common mistake: skipping the bottom attachment points leaves a gap that kids can slip through. Check that the net is securely attached at the top and bottom before allowing jumping.
  5. Attach the Triple Toss game: Use the provided hardware to mount the game according to its instructions. Position it so it does not block the entry or interfere with the net. Common mistake: attaching the game to the net itself can damage the net or create a fall hazard. Mount the game to the frame or designated points, never to the net.
  6. Final safety check: Inspect all bolts, springs, and net attachments. Make sure the frame is stable and the mat is centered. Check that the Triple Toss game is secure and cannot be pulled off. Common mistake: skipping the final check can leave loose hardware that works loose during use. Do a complete walk-around inspection before the first jump.

Product facts

Shop Related Products

17' oval med innhegning og trippelkastspill

17' oval med innhegning og trippelkastspill

$315.00 $630.00

Shop Now