Zpět na blog
Návody 2026-11-20 Skywalker Trampolines - The Best Kids Trampoline 0 zobrazení

U-Tube Replacement: How to Swap a Damaged Trampoline Frame Part

U-Tube Replacement: How to Swap a Damaged Trampoline Frame Part

Learn how to identify a damaged U-tube on your trampoline and swap it with a genuine replacement. This guide covers fit checks, removal steps, and what to expect from the part.

Identifying the Damaged U-Tube

The U-shaped tube is a common frame component on many Skywalker trampolines. It connects the legs or supports the enclosure arch, and over time it can bend or dent from impact or rust. Before you order a replacement, confirm that the damaged part is a U-tube and not a straight or corner tube. The U-tube has a distinct curved shape at both ends, forming a U when viewed from the side.

What the Genuine Replacement U-Tube Offers

  • U-Tube: This replacement U-shaped tube is constructed of rust resistant powder coated steel. It is a Skywalker Trampoline genuine component and meets or exceeds all ASTM safety standards. It comes with a one year limited warranty. The powder coated steel resists rust better than uncoated metal, which is important for outdoor trampolines exposed to moisture. The ASTM certification means the part meets recognized safety requirements, and the one-year warranty covers manufacturing defects.
    U-Tube
    U-Tube

Step-by-Step: Swapping the Damaged U-Tube

The following steps are based on typical frame repair procedures. The supplied information does not include specific installation instructions for this part, so use general trampoline frame disassembly practices and check fitment before removing the old tube.

  1. 1. Check fit before you start: Measure the distance between the two mounting holes on your current U-tube (center to center). Compare it to the replacement tube. Also note the tube diameter and the shape of the ends—does it slide into a socket or bolt onto a bracket? The catalog confirms the material (powder coated steel) but does not list dimensions, so measuring your old part is essential.
  2. 2. Remove the old U-tube: Use a wrench or socket set to remove the bolts and nuts holding the damaged tube in place. Keep the hardware if it is still in good condition. If the tube is stuck due to rust, apply a penetrating lubricant and wait a few minutes before attempting removal.
  3. 3. Install the replacement U-tube: Position the new tube in the same orientation as the old one. Insert bolts through the frame brackets and the tube ends, then tighten the nuts securely. Do not overtighten, as this could strip the threads or bend the tube. Check that the tube sits flush against the frame and does not rock.
  4. 4. Test for stability: After installation, gently push on the frame near the replaced tube. There should be no movement or creaking. If the tube shifts, recheck the bolt tightness and alignment. A loose U-tube can affect the trampoline's overall stability.

What the Catalog Does Not Confirm

The supplied product information does not include exact dimensions, weight capacity, or installation instructions for the U-tube. It also does not specify which trampoline models this part fits. To ensure compatibility, measure your existing tube and compare the mounting hole spacing and tube diameter. If you are unsure, contact Skywalker customer support with your trampoline model number before ordering.

Související články

Customer Service
Domů
Produkty
Košík
Profil