Trampoline Replacement Hardware Kit: Bolts, Washers, and Score Tabs You Should Keep on Hand

Quick Answer

Keep a small stock of M6x62mm bolts, M8x18 allen head bolts, M4 washers, and score tabs for quick trampoline repairs. For Skywalker models, use genuine components to ensure safety and durability. If you are unsure about sizes, check your owner's manual or the model tag under the jump mat.

Trampoline hardware may seem minor, but a missing bolt or washer can turn a fun bounce into a safety hazard. Keeping a few key parts on hand means you can fix a loose frame or a popped score tab right away instead of waiting days for a shipment.

This guide covers the essential trampoline replacement hardware kit: bolts, washers, and score tabs. You will learn what each part does, how to choose the right size, and when to buy genuine Skywalker components. We will also share fit guidance so you avoid buying the wrong part.

Why a Trampoline Hardware Kit Matters

Trampolines take a beating from weather, jumping, and time. Bolts loosen, washers wear, and score tabs—the small metal pieces that hold the frame together—can crack or bend. If you have a replacement hardware kit, you can handle these fixes immediately and avoid downtime.

Using the wrong hardware can damage the frame or create an unsafe jump surface. Genuine parts are tested to meet ASTM standards, so they fit correctly and hold up under repeated use. A small investment in spare parts now can save you from a bigger repair later.

• Store hardware in a labeled container to avoid mixing sizes.
• Check bolts and washers for rust or wear every few months.

Key Hardware Pieces for Your Kit

Bolts are the main fasteners that hold the trampoline frame together. Common sizes include M6 and M8, with lengths that vary by model. For example, the M6x62mm bolt is used in certain frames to connect the top rails. An M8x18 bolt with an allen head is another common size for enclosure poles.

Washers sit under the bolt head or nut to spread the load and prevent damage to the frame. M4 washers are typical for smaller fasteners, while larger washers are used with bigger bolts. Score tabs are the small metal brackets that lock into the frame's connecting points, providing extra stability at the joints.

• Always match the bolt size to the hole in the frame.
• If a washer is missing, replace it immediately to avoid frame damage.

How to Choose the Right Replacement Hardware

First, identify your trampoline model. You can find the model number on a white tag under the jump mat or on the frame. This number will help you find the correct parts. Check the user manual or the Skywalker site for a hardware diagram.

When ordering, pay attention to bolt diameter, length, and head type. An M8x18 bolt has an 8mm diameter and 18mm length. If you are unsure, measure the existing bolt with a ruler or caliber. Also note whether it is an allen head or a hex head—they require different tools.

• Take a clear photo of the part before ordering.
• Buy from a genuine parts supplier to ensure quality and fit.

Decision Rules for Building Your Hardware Kit

• Match the bolt size exactly: Use the model number to find the right diameter and length. A bolt that is too short won't secure the frame; too long can protrude and cause injury. Check the part diagram or measure the old bolt.
• Choose genuine parts for critical joints: Genuine Skywalker components are tested to meet or exceed ASTM standards. Aftermarket parts may fit poorly or fail during use. Buy genuine for safety-critical hardware.
• Include score tabs in your kit if they are used: Score tabs lock the frame together. If they break, the frame can weaken. Keep spares if your model uses them. Verify if your model uses score tabs and keep extra ones.

Genuine Skywalker Hardware Components

• M6x62mm Bolt - Qty 4: This genuine Skywalker component meets or exceeds ASTM safety standards and comes with a one-year limited warranty. It includes four bolts. If your frame uses M6x62mm bolts, having a spare set ensures you can replace a lost or stripped bolt without delaying your repair.
• 60" Dark Gray Handrail Sleeve: This replacement handrail sleeve is made of polyester and is a genuine Skywalker component, tested to meet or exceed ASTM standards, with a one-year limited warranty. A worn sleeve can expose the handrail, increasing injury risk. Replacing it keeps the handrail comfortable and safe for kids.

Who Should Get a Hardware Kit

Best for

• Families with active kids who bounce daily and may loosen hardware quickly.
• Owners who prefer fixing minor issues themselves without waiting for a technician.

Not for

• If you are not comfortable with basic DIY repairs, you might prefer hiring a professional to handle replacements.
• If your trampoline uses uncommon bolt sizes, you may need to order custom parts instead of a standard kit.

Building a trampoline replacement hardware kit is a smart move for any owner. Keep a few key bolts, washers, and score tabs on hand, and you can quickly fix loose joints and worn parts. Remember to always match the exact size and choose genuine components for safety and durability. With a small investment, you can extend the life of your trampoline and keep your kids bouncing safely.