Back to Blog
How-to Guides 2026-11-20 Skywalker Trampolines - The Best Kids Trampoline 0 views

Replace 60" Seafoam Green Handrail Foam on Your Trampoline

Replace 60" Seafoam Green Handrail Foam on Your Trampoline

Learn how to replace worn 60-inch seafoam green handrail foam on your Skywalker trampoline. Includes product details, installation tips, and fit checks.

When to Replace Handrail Foam

Over time, the foam on your trampoline handrail can become compressed, cracked, or faded from sun and use. Worn foam reduces grip comfort and may expose the underlying metal tube, increasing the risk of pinched fingers or scraped hands. Replacing it restores a safe, comfortable handhold for jumpers entering and exiting the trampoline.

What the Replacement Foam Includes

  • 60" Seafoam Green Handrail Foam: Two seafoam green handrail foam pieces made from EPE material. EPE foam is lightweight, closed-cell, and resists moisture absorption, making it a good choice for outdoor trampoline use.
    60" Seafoam Green Handrail Foam
    60" Seafoam Green Handrail Foam
  • 60" Seafoam Green Handrail Foam: Sold as a set of 2, covering both sides of a typical handrail assembly. Ordering one set gives you enough foam for the full handrail, avoiding mismatched colors or material differences.
  • 60" Seafoam Green Handrail Foam: Genuine Skywalker Trampoline component backed by a one-year limited warranty. Using OEM parts helps maintain safety and warranty coverage on the trampoline frame.

How to Remove the Old Foam

Before you start, make sure the trampoline is on a level surface and the handrail is stable. You will not need any tools for this step.

  1. Slide the old foam off: Grasp one end of the existing foam sleeve and slide it toward the open end of the handrail tube. If the foam is stuck, gently twist it while pulling. Repeat for the second side.
  2. Inspect the handrail tube: Check the metal tube for rust, burrs, or sharp edges. Light surface rust can be sanded smooth; deeper damage may require replacing the handrail assembly.
  3. Clean the tube surface: Wipe the tube with a damp cloth to remove dirt or debris. Let it dry completely before installing the new foam.

Installing the New 60" Seafoam Green Foam

The replacement foam has a slit along its length that allows it to wrap around the handrail tube. Work carefully to avoid tearing the foam.

  1. Align the slit with the tube: Hold the foam so the slit faces the handrail tube. Starting at one end, press the foam onto the tube, working the slit around the metal.
  2. Push the foam into position: Slide the foam along the tube until it covers the full length of the handrail. The foam should sit flush against any end caps or bends.
  3. Repeat for the second piece: Install the second foam piece on the opposite handrail section using the same method.

Fit and Compatibility Check

This foam is designed for Skywalker trampoline handrails that use a straight tube section of that length. Before purchasing, measure your existing handrail tube from end to end to confirm it matches the supplied product instructions. The foam fits tubes with a diameter typical of Skywalker handrails, but verify that the slit can wrap around your tube without excessive stretching.

If your handrail has a curved or angled section, the straight foam may not conform tightly. In that case, consider a foam sleeve specifically shaped for your model.

What the Catalog Does Not Confirm

The supplied product record does not include specific installation instructions from the manufacturer, such as recommended adhesive or curing time. The foam relies on friction and the slit to stay in place. If you notice the foam slipping after installation, a small amount of double-sided tape or silicone adhesive (not included) may help secure it, but this is not covered by the one-year warranty.

The catalog also does not specify a replacement interval. Inspect the foam at the start of each season and replace it if you see cracks, compression, or discoloration.

Related Articles

Customer Service
Home
Products
Cart
Profile