Back to Blog
How-to Guides 2026-11-22 Skywalker Trampolines - The Best Kids Trampoline 0 views

How to Replace the M8x50 Square Bolt on a Trampoline

How to Replace the M8x50 Square Bolt on a Trampoline

Learn how to replace a worn or missing M8x50 square bolt on your Skywalker trampoline. This guide covers identification, removal, and installation using a genuine replacement part.

When to Replace the M8x50 Square Bolt

The M8x50 square bolt is a common fastener on Skywalker trampoline frames. Over time, bolts can become stripped, rusted, or lost during disassembly. If you notice a loose frame connection, a missing bolt, or difficulty tightening a joint, it may be time to replace the square bolt.

Using the correct size (M8x50mm) is important for a secure fit. A bolt that is too short may not engage enough threads, while a longer bolt could protrude and create a safety hazard.

What the Genuine Replacement Bolt Offers

  • M8x50 Square Bolt - Qty 4: M8x50mm square bolt. Skywalker Trampolines genuine component. Meets or exceeds all ASTM safety standards. One year limited warranty. Qty: 4. Using a genuine bolt ensures the correct dimensions and material quality. The ASTM compliance and warranty provide confidence that the part is designed for your trampoline.
    M8x50 Square Bolt - Qty 4
    M8x50 Square Bolt - Qty 4

How to Replace the M8x50 Square Bolt

Follow these steps to remove the old bolt and install the new one. The same process applies to each bolt you need to replace.

  1. 1. Remove the old bolt: Use a suitable wrench or socket to unscrew the nut and remove the old bolt. If the bolt is seized, apply a penetrating lubricant and allow it to soak before attempting removal.
  2. 2. Clean the hole and surrounding area: Wipe away any dirt, rust, or debris from the frame hole and the area where the bolt seats. This helps the new bolt fit properly and reduces future corrosion.
  3. 3. Insert the new M8x50 square bolt: Align the square shoulder of the bolt with the corresponding square hole in the frame. Push the bolt through until the head is flush against the frame.
  4. 4. Secure with the nut and tighten: Thread the nut onto the bolt and tighten it securely. Do not overtighten, as this could strip the threads or damage the frame. Check that the joint is firm and does not wobble.

Compatibility and Fit Notes

The M8x50 square bolt is designed for Skywalker trampoline frames that use a square-shank bolt of this size. It is not interchangeable with round-shank bolts or metric bolts of a different length. If you are unsure whether this is the correct part for your trampoline model, compare the existing bolt or consult the product documentation.

The replacement comes as a pack of four bolts, which is convenient if you need to replace multiple fasteners at once or keep spares on hand.

Related Articles

Customer Service
Home
Products
Cart
Profile