How to Measure and Replace Your Trampoline's Safety Net and Spring Pad

Quick Answer

To replace your trampoline's safety net and spring pad, first measure the trampoline's frame diameter and the net's height. Then, purchase compatible replacement parts, remove the old components, and install the new ones following the manufacturer's instructions. Always prioritize safety by using genuine parts that meet ASTM standards.

A trampoline's safety net and spring pad are essential for protecting jumpers from falls and pinched fingers. Over time, exposure to sun and weather can weaken these parts, making replacement necessary. Knowing how to measure and replace them ensures your trampoline remains safe and fun for years.

This guide walks you through the process step by step, from taking accurate measurements to installing the new net and pad. We'll also highlight common mistakes to avoid and when to consider genuine Skywalker Trampoline replacement parts.

Measuring Your Trampoline's Safety Net and Spring Pad

Before ordering a replacement safety net or spring pad, you need to know your trampoline's exact dimensions. The most critical measurement is the frame diameter, which determines the size of the net and pad. Measure from the outer edge of the frame, across the center, to the opposite outer edge. For round trampolines, this is straightforward; for rectangular or oval models, measure the longest and shortest sides.

Next, measure the height of the enclosure poles, as this determines the net height. The net should be tall enough to prevent jumpers from falling over the edge but not so tall that it interferes with jumping. Also, note the number of enclosure poles and the distance between them, as the net's attachment points must align. If you have a Skywalker Trampoline, check the model number—often found on the frame or in the manual—to ensure compatibility.

• Use a metal tape measure for accuracy, and measure twice to avoid errors.
• Record the frame diameter, pole height, and pole count before shopping.

Choosing the Right Replacement Net and Pad

Once you have your measurements, you can select a replacement net and spring pad. Look for nets made of tightly-woven polyethylene with UV protection to withstand sun exposure. The net should have reinforced button holes or attachment points that match your trampoline's V-rings or hooks. For the spring pad, ensure it covers the springs completely and has tie-down straps that secure it to the frame.

Genuine Skywalker Trampoline parts are designed to fit their models perfectly, but compatible aftermarket options can work if they meet safety standards. Check that the replacement net and pad meet or exceed ASTM safety standards, which test for durability and safety. If you're unsure about compatibility, contact the manufacturer with your model number and measurements.

• Verify the number of enclosure poles and the spacing to ensure the net fits.
• For spring pads, measure the frame's outer diameter and the spring length to ensure full coverage.

Removing the Old Safety Net and Spring Pad

Start by removing the spring pad, which is usually secured with straps or ties. Unfasten these and lift the pad off the frame. Next, detach the safety net from the enclosure poles. The net may be attached with clips, hooks, or by sliding over the poles. Carefully remove the net, taking note of how it was attached to make installation easier.

Inspect the enclosure poles and frame for any damage while you have the net and pad off. If you notice bent or rusted poles, consider replacing them before installing the new net. Skywalker Trampolines offers replacement poles, such as the Curved Enclosure Pole, to ensure your enclosure is structurally sound. Also, check the jump mat and springs for wear, as these are critical for safety.

• Take photos of the old setup before removal to reference during installation.
• Keep all screws, clips, and straps organized to reuse them if they're in good condition.

Installing the New Safety Net

Begin by sliding the new net over the enclosure poles, ensuring the entrance is aligned with the door opening. Attach the net to the poles using the provided clips or hooks, starting at one pole and working around. Make sure the net is pulled taut but not overly stretched, as this can cause stress on the material. Secure the bottom of the net to the jump mat's V-rings, as this prevents jumpers from slipping under the net.

If your net has a zippered door, test the zipper to ensure it opens and closes smoothly. Use the latch clips to secure the door entrance. A common mistake is leaving gaps between the net and the mat—these can be dangerous. Double-check all attachment points before allowing anyone to jump.

• Ensure the net's bottom is securely attached to the jump mat to prevent gaps.
• If you have a Skywalker Trampoline, the 15' Round Net and Jump Mat is a compatible replacement that includes both net and mat.

Installing the New Spring Pad

Place the spring pad over the springs, aligning it so it covers the entire spring area. Secure the pad using the tie-down straps or hooks, pulling them tight to keep the pad in place. Make sure the pad does not shift when the trampoline is in use. A properly installed pad protects jumpers from landing on the springs or frame.

Check that the pad's seams and edges are in good condition, as tears can expose springs. If the pad is too small, it won't provide adequate coverage; if it's too large, it may bunch up and create tripping hazards. Always follow the manufacturer's instructions for your specific pad model.

• Tighten all straps evenly to avoid wrinkles that can catch feet.
• Inspect the pad after each use for any signs of wear or shifting.

Step-by-Step Replacement Checklist

1. Measure accurately: Measure the frame diameter, pole height, and pole count. Record these numbers. Double-check measurements to avoid ordering the wrong size.
2. Choose compatible parts: Select a net and pad that match your measurements and trampoline model. Look for UV-protected materials and ASTM certification. Genuine Skywalker parts guarantee a perfect fit.
3. Remove old components: Unfasten the spring pad and detach the net. Inspect poles and frame for damage. Replace any damaged poles before installing the new net.
4. Install the new net: Slide the net over poles, attach securely, and connect the bottom to the jump mat. Ensure no gaps exist between net and mat.
5. Install the new spring pad: Place the pad over springs and secure all straps tightly. Check that the pad covers all springs and stays in place.

Replacement Parts to Consider

• 15' Round Net and Jump Mat, CK6030, CK7015: This enclosure net is made of tightly-woven polyethylene, providing UV protection. The jump mat is made of UV-protected polypropylene, woven to prevent slipping. This combo ensures your net and mat are compatible and offers UV protection, extending the life of your trampoline's key components.



• Curved Enclosure Pole (Key 3): This replacement curved enclosure tube is constructed of rust resistant powder coated steel. If your enclosure poles are rusted or bent, replacing them with a genuine Skywalker part maintains the structural integrity of your safety net.

Replacing your trampoline's safety net and spring pad is a manageable DIY task that significantly enhances safety. By measuring correctly, choosing quality parts, and following these steps, you can extend the life of your trampoline and ensure a safe bouncing experience. Always prioritize genuine Skywalker Trampoline replacement parts for the best fit and durability.